01
Narrower listed width
The listed overall layout is 2100 × 480 mm; confirm usable support width and accessory clearances.
Operating Tables
YK-OT3012 Electric Operating Table
A 2100 × 480 mm electric operating table with a 680–930 mm listed height range, split leg sections and a detachable foot-plate arrangement. Review its support layout and positioning requirements.
Configuration At A Glance
02
Foot-plate arrangement
A detachable foot plate and a 90° relationship to the leg plate are listed. Confirm the exact supplied parts.
03
Kidney bridge
The listed kidney-bridge elevation is 100 mm.
Review The Layout For Your Room
YK-OT3012 is a 480 mm-wide configuration with separately specified head, back and leg movements. Its listed foot-plate arrangement can form a 90° angle with the leg plate and is detachable. Confirm which components are included, their attachment method and the usable support area for the selected setup.
YK-OT3012 Specifications
Use the figures below to compare this configuration. Confirm the final drawing, measurement references and operating conditions with your quotation.
| Overall length / width | 2100 × 480 mm |
|---|---|
| Height range | 680–930 mm |
| Trendelenburg / reverse Trendelenburg | 25° / 25° |
| Lateral tilt | 15° |
| Head section raised / lowered | 45° / 90° |
| Back section raised / lowered | 45° / 15° |
| Leg section raised / lowered | 15° / 90° from horizontal |
| Leg-section opening angle | 180° |
| Foot-plate arrangement | Detachable; listed 90° angle with leg plate |
| Kidney-bridge elevation | 100 mm |
| Longitudinal movement | Confirm; a travel figure is not established for this configuration |
| Permitted load and power supply | Confirm for the supplied configuration |
Before You Confirm The Order
Build the order around the exact equipment set and the space where it will be installed. Record the agreed configuration so that inspection, delivery and setup use the same requirements.
- 01
Confirm the permitted patient and accessory loads in every required position.
- 02
Approve the head, arm, leg and restraint supports, accessory-rail dimensions and delivered component list.
- 03
Confirm tabletop materials, mattress thickness, cleaning compatibility and any imaging-clearance requirements.
- 04
Agree controls, installation, operating instructions, maintenance, packing dimensions and replacement parts.
Compare Related Configurations
YK-OT3010 Electric Operating Table
An electric operating table with a 2125 × 550 mm listed top layout, a 680–930 mm height range and 250 mm longitudinal movement. Compare its positioning ranges and accessory setup before ordering.
Compare Specifications →YK-OT3011 Electric Operating Table
A 2125 × 550 mm electric operating table with a 700–1000 mm listed height range, 300 mm longitudinal movement and a kidney-bridge elevation of at least 120 mm.
Compare Specifications →YK-OT3013 Multipurpose Operating Table
A multipurpose operating-table configuration with a 2100 × 480 mm listed size, a 720–920 mm height range and a 120 mm kidney-bridge elevation. Confirm the actuation and support arrangement.
Compare Specifications →Questions About YK-OT3012
Request Your YK-OT3012 Configuration Quote
Send the model, quantities, destination and required setup. We can prepare a configuration-based quotation for your project or distribution order, with packing and documentation requirements agreed before dispatch.